{"product_id":"dobot-cr5af-force-sensing-collaborative-robot","title":"Dobot CR5AF Force-Sensing Collaborative Robot","description":"\u003cp\u003eThe CR5AF is Dobot's 5 kg CRA arm with a six-axis force and torque sensor built into the flange and calibrated at the factory. It is made for work where position alone is not enough: polishing a curved panel, sanding, pressing a connector home or fitting a shaft, where the robot has to feel how hard it is pushing and correct as it goes.\u003c\/p\u003e\u003cp\u003eBecause the sensor sits inside the flange, there is no adapter plate, no extra length at the tool and no external sensor cable. Force control does not use the tool-side RS485 or I\/O, so electric grippers and smart cameras connect as usual. Dobot gives the sensor a range of 150 N for Fx, Fy and Fz and 15 N·m for Mx, My and Mz, with 1% F.S. accuracy and 500% F.S. overload.\u003c\/p\u003e\u003cp\u003eHand guiding is light. The whole flange is a drag zone with a start force under 2 N and a press-to-drag button, and orientation can be locked to teach precise paths. Dobot rates constant-force following at ±3 N on complex surfaces and collision detection from 1 N, and a ring light on the flange shows the robot's state.\u003c\/p\u003e\u003cp\u003eThe arm carries 5 kg across a 900 mm working radius, repeats to ±0.02 mm, weighs 25.5 kg and draws 150 W. It is rated IP54 and mounts upright. For wet or oily cells the IP68 CR5AP is the better match, and for close work beside people the CR5AS adds SafeSkin.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForce sensor inside the flange:\u003c\/strong\u003e The six-axis sensor measures force and torque where the tool meets the part, with no external sensor to mount or cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory calibrated:\u003c\/strong\u003e The sensor needs no further calibration or configuration before force-controlled work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool ports stay free:\u003c\/strong\u003e Force control leaves the flange's two DI, two DO and two AI (shared with RS485) for the gripper or camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant force on curved parts:\u003c\/strong\u003e Dobot rates contact force following at ±3 N on complex surfaces, for even polishing, sanding and deburring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight hand guiding:\u003c\/strong\u003e A drag start force under 2 N and a press-to-drag button make teaching by hand quick and precise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitive collision detection:\u003c\/strong\u003e The robot detects collisions from 1 N and stops, with a ring status light on the flange.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.\u003c\/p\u003e","brand":"Dobot","offers":[{"title":"Default Title","offer_id":68379483046125,"sku":"Dobot-1200000187-Z","price":17600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/2613\/1949\/files\/cr5af_1200000187-z.jpg?v=1795081767","url":"https:\/\/robotixmarket.com\/de\/products\/dobot-cr5af-force-sensing-collaborative-robot","provider":"Robotix Market","version":"1.0","type":"link"}