- 500 N force range The flange sensor reads up to 500 N and 50 N·m on each axis, sized for heavy tools pressed firmly against a surface.
- 20 kg across 1,700 mm Payload and reach cover large spindles and sanders working over long panels and frames from one base.
- Steady contact on curves Force feedback holds a set pressing force as the surface changes, which evens out the finish on imperfect parts.
- Force-guided insertion The arm can search for and align heavy shafts, bearings and housings by feel.
- Four DI and four DO at the tool The force system does not occupy the tool-side I/O or RS485.
- Industrial controller The CC263 cabinet connects to PLCs and line equipment over Ethernet protocols including PROFINET and EtherNet/IP, plus Modbus.
Description
The CR20AF pairs a 20 kg payload and 1,700 mm working radius with a six-axis force and torque sensor inside the flange. It is the CRAF model for heavy contact work: large polishing heads, sanders and grinders held against car body panels, furniture surfaces or weld seams on big frames, with the robot regulating how hard it presses.
The sensor measures up to 500 N along and 50 N·m around each axis, with 1% F.S. accuracy, 0.5% F.S. precision and 500% F.S. overload, and it arrives calibrated from the factory. Force feedback also lets the arm search, align and insert heavy shafts, bearings and housings instead of jamming them.
The arm weighs 74 kg, repeats to ±0.05 mm and has a maximum linear speed of 2 m/s. J3 turns ±165° and the other joints ±360°; J1 and J2 reach 120°/s, J3 150°/s and the wrist joints 180°/s. It draws 500 W, connects to the CC263 control cabinet on a 6 m cable and mounts upright, rated IP54 from 0 to 50 °C.
Force control leaves the tool side free, so four digital inputs, four digital outputs and RS485 remain for spindles, grippers and sensors. Grinding and sanding cells need dust extraction and guarding, and a 74 kg arm with this reach needs a rigid floor mount or pedestal.
Key Capabilities
- 500 N force range: The flange sensor reads up to 500 N and 50 N·m on each axis, sized for heavy tools pressed firmly against a surface.
- 20 kg across 1,700 mm: Payload and reach cover large spindles and sanders working over long panels and frames from one base.
- Steady contact on curves: Force feedback holds a set pressing force as the surface changes, which evens out the finish on imperfect parts.
- Force-guided insertion: The arm can search for and align heavy shafts, bearings and housings by feel.
- Four DI and four DO at the tool: The force system does not occupy the tool-side I/O or RS485.
- Industrial controller: The CC263 cabinet connects to PLCs and line equipment over Ethernet protocols including PROFINET and EtherNet/IP, plus Modbus.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.
Fonctionnalités
Spécifications
| Brand | Dobot |
|---|---|
| Model | CR20AF (CRAF series) |
| Dobot Part Number | 1200000328-Z |
| Product Type | Six-axis collaborative robot arm with integrated flange force sensor |
| Degrees of Freedom | 6 |
| Payload | 20 kg |
| Working Radius | 1,700 mm |
| Repeatability | ±0.05 mm |
| Maximum Linear Speed | 2 m/s |
| Joint Ranges | J1, J2, J4, J5, J6 ±360°; J3 ±165° |
| Maximum Joint Speed | J1 and J2 120°/s; J3 150°/s; J4 to J6 180°/s |
| Force Sensor Range | Fx/Fy/Fz 500 N; Mx/My/Mz 50 N·m |
| Force Sensor Accuracy / Precision | 1% F.S. / 0.5% F.S. |
| Force Sensor Overload | 500% F.S. |
| End Effector I/O | 4 DI, 4 DO, RS485 |
| Weight | 74 kg |
| Power Consumption | 500 W |
| Cable Length | 6 m |
| Mounting | Upright |
| Ingress Protection | IP54 |
| Noise | 70 dB(A) or less |
| Operating Temperature | 0 to 50 °C |
| Materials | Aluminium alloy, ABS |
| Control Cabinet | CC263 |
| What's in the Box | Confirm at quote |
Secteurs
Questions fréquentes
It marks the force-control version of the CRA arm, with a six-axis force and torque sensor integrated in the flange.
Up to 500 N of force and 50 N·m of torque on each axis, with 1% F.S. accuracy.
Both carry 20 kg over 1,700 mm. The CR20AF adds the flange force sensor and is rated IP54; the CR20AP has no force sensor but an IP68 sealed arm for wet, oily or dusty cells.
The CR5AF is the 5 kg, 900 mm model with a 150 N sensor for fine finishing and small-part assembly. The CR20AF carries four times the payload with a 500 N sensor for heavy tools.
A rigid floor mount or pedestal. The arm weighs 74 kg and reaches 1,700 mm.
The Dobot CR20AF Force-Sensing Collaborative Robot is priced at $29,500 in your market. For volume or project orders, contact us for a business quote.
Consultés récemment
Vous n'avez encore consulté aucun produit.
