- 30 kg payload, 1,800 mm reach Enough for heavy cases, bags and blanks across a full pallet from one base.
- 300°/s wrist joints J4, J5 and J6 turn at up to 300°/s, which Dobot describes as the fastest in its class.
- IP65 arm The arm is protected against dust, water jets and oil.
- Floor, wall or ceiling Three mounting orientations fit the arm to the cell.
- Safety I/O in the cabinet Ten safety inputs and ten safety outputs connect light curtains, scanners and emergency stops.
- Standard Edition Without joint torque sensors, it suits structured cycles where positions are programmed rather than taught by hand.
Description
The CR 30H is Dobot's heavy-payload collaborative robot: 30 kg of payload, 1,800 mm of reach and wrist joints that turn at 300°/s, which Dobot describes as the fastest in its class. The Standard Edition is the base model of the line, built for structured, repeating cycles such as palletizing, heavy handling and machine tending.
Unlike the CR 30HT Touch Edition, the Standard Edition has no joint torque sensors and no one-hand drag-to-teach; it is programmed from the teach pendant, a PC or the Android app. It weighs 100 kg, against 102 kg for the Touch Edition. If operators will often teach new positions by hand, or you want torque-based collision response, the HT is the edition to compare.
Repeatability is ±0.05 mm and Dobot gives a maximum TCP speed of 6 m/s. J1, J2, J4, J5 and J6 turn ±360° and J3 ±163°; J1 and J2 reach 150°/s and J3 200°/s. The arm is rated IP65 against dust, water jets and oil, runs from 0 to 50 °C at 70 dB(A), mounts on the floor, a wall or a ceiling and connects to its control cabinet over a 6 m cable.
The cabinet runs on single-phase 200 to 240 V AC and carries 24 digital inputs and 24 outputs (NPN or PNP), 2 analogue inputs and 2 outputs, 10 safety inputs and 10 safety outputs, two Ethernet ports for TCP/IP, Modbus TCP, EtherNet/IP and PROFINET, RS485 for Modbus RTU and an ABZ encoder input. The flange supplies 0, 12 or 24 V tool power at 2 A continuous and 3 A peak, and fail-safe brakes hold the arm on power loss.
Key Capabilities
- 30 kg payload, 1,800 mm reach: Enough for heavy cases, bags and blanks across a full pallet from one base.
- 300°/s wrist joints: J4, J5 and J6 turn at up to 300°/s, which Dobot describes as the fastest in its class.
- IP65 arm: The arm is protected against dust, water jets and oil.
- Floor, wall or ceiling: Three mounting orientations fit the arm to the cell.
- Safety I/O in the cabinet: Ten safety inputs and ten safety outputs connect light curtains, scanners and emergency stops.
- Standard Edition: Without joint torque sensors, it suits structured cycles where positions are programmed rather than taught by hand.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.
Features
Specs
| Brand | Dobot |
|---|---|
| Model | CR 30H Standard Edition |
| Product Type | Six-axis heavy-payload collaborative robot arm |
| Degrees of Freedom | 6 |
| Payload | 30 kg |
| Reach | 1,800 mm |
| Repeatability | ±0.05 mm |
| Maximum TCP Speed | 6 m/s |
| Joint Ranges | J1, J2, J4, J5, J6 ±360°; J3 ±163° |
| Maximum Joint Speed | J1 and J2 150°/s; J3 200°/s; J4 to J6 300°/s |
| Joint Torque Sensors | Not fitted (Standard Edition) |
| Weight | 100 kg |
| Tool Power Supply | 0/12/24 V, 2 A continuous, 3 A peak |
| Ingress Protection | IP65 (arm) |
| Noise | 70 dB(A) |
| Operating Temperature | 0 to 50 °C |
| Mounting | Floor, wall or ceiling |
| Cable to Control Cabinet | 6 m |
| Materials | Aluminium alloy, ABS plastic, rubber |
| Control Cabinet Power | Single-phase 200 to 240 V AC, 50/60 Hz |
| Controller I/O | 24 DI, 24 DO (NPN/PNP); 2 AI, 2 AO; 10 safety inputs, 10 safety outputs |
| Communication | 2× Ethernet (TCP/IP, Modbus TCP, EtherNet/IP, PROFINET); RS485 (Modbus RTU); USB; ABZ encoder input |
| Control Cabinet Protection | IP20, IP54 as an option |
| What's in the Box | Confirm at quote |
Industries
Frequently Asked Questions
The CR 30HT Touch Edition adds built-in joint torque sensors, one-hand drag-to-teach and torque-based collision response, and weighs 102 kg. The Standard Edition has none of these and weighs 100 kg. Payload and reach are the same.
Up to 30 kg, with 1,800 mm of reach.
Dobot gives a maximum TCP speed of 6 m/s, with the wrist joints at up to 300°/s.
Yes. Floor, wall and ceiling mounting are supported.
Single-phase 200 to 240 V AC at 50 or 60 Hz. The cabinet is IP20, with IP54 as an option.
The Dobot CR 30H Standard Edition Collaborative Robot is priced at $34,000 in your market. For volume or project orders, contact us for a business quote.
Recently Viewed
You haven't viewed any products yet.
