- 11 degrees of freedom, 6 active Six motors drive eleven joints across the thumb and four fingers through a worm-gear transmission.
- 379 g and 26.35 mm thick At 147.54 × 73.53 × 26.35 mm and 379 g, the hand keeps weight and bulk low at the end of a humanoid arm.
- Opens and closes in 0.7 s The thumb swings 87.5° sideways and flexes 65°, the four fingers bend 72°, and a full open-close takes 0.7 s or less.
- Optional palm and fingertip touch The palm sensor reads normal force up to 25 N at 0.1 N, and the finger sensors read up to 20 N at 0.01 N with tangential direction to 1°.
- EtherCAT, CAN FD or RS485 The bus is chosen with the order, on a 12–48 V supply drawing 0.1 A at rest and 2.5 A at most.
- URDF, MJCF and STEP files Model files, a visual host application, an open SDK and examples in C++ and Python run on Windows, Linux and ROS 2, on x86 or ARM.
- 250,000 loaded cycles RoboParty rates the hand for 250,000 cycles unloaded and 250,000 at full-load side grip, with a three-year design life and IP30 protection.
Description
The RoboParty RP Hand is a slim dexterous robotic hand made to fit on a humanoid wrist. It has 11 degrees of freedom, six of them active, and weighs 379 g (±10 g) at 147.54 × 73.53 × 26.35 mm, so it adds little mass or thickness at the end of the arm. Six brushless coreless motor modules, each with an integrated multi-in-one driver and miniature encoders, move the thumb and four fingers through a worm-gear transmission.
The thumb swings 0–87.5° sideways and flexes 0–65°, the four fingers bend 0–72°, and a full open-close takes 0.7 s or less. The hand runs from 12 V (−10 %) to 48 V (+10 %), drawing up to 0.1 A at rest and 2.5 A at most. RoboParty rates it for 250,000 cycles unloaded and 250,000 cycles at full-load side grip, with a three-year design life, IP30 protection and an operating range of −10 to 45 °C.
Tactile sensing is chosen with the order. The optional palm sensor reads normal force from 0 to 25 N at 0.1 N resolution; the optional finger sensors read normal force from 0 to 20 N at 0.01 N and the direction of tangential force across 360° at 1°. The bus is chosen the same way: EtherCAT, CAN FD or RS485. Grip force, payload and the wrist adapter for your robot are confirmed with the quotation.
For development, RoboParty provides a visual host application, an open SDK and example programs in C++ and Python for Windows, Linux and ROS 2 on x86 or ARM, plus URDF, MJCF and STEP model files for simulation and mechanical design. Compare it with other humanoid hands in our dexterous robotic hands.
Key Capabilities
- 11 degrees of freedom, 6 active: Six motors drive eleven joints across the thumb and four fingers through a worm-gear transmission.
- 379 g and 26.35 mm thick: At 147.54 × 73.53 × 26.35 mm and 379 g, the hand keeps weight and bulk low at the end of a humanoid arm.
- Opens and closes in 0.7 s: The thumb swings 87.5° sideways and flexes 65°, the four fingers bend 72°, and a full open-close takes 0.7 s or less.
- Optional palm and fingertip touch: The palm sensor reads normal force up to 25 N at 0.1 N, and the finger sensors read up to 20 N at 0.01 N with tangential direction to 1°.
- EtherCAT, CAN FD or RS485: The bus is chosen with the order, on a 12–48 V supply drawing 0.1 A at rest and 2.5 A at most.
- URDF, MJCF and STEP files: Model files, a visual host application, an open SDK and examples in C++ and Python run on Windows, Linux and ROS 2, on x86 or ARM.
- 250,000 loaded cycles: RoboParty rates the hand for 250,000 cycles unloaded and 250,000 at full-load side grip, with a three-year design life and IP30 protection.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | RoboParty |
|---|---|
| Model | RP Hand |
| Product type | Dexterous robotic hand for humanoid robots |
| Fingers | Thumb and four fingers |
| Degrees of freedom | 11 (6 active) |
| Mass | 379 g ± 10 g |
| Dimensions (L × W × T) | 147.54 × 73.53 × 26.35 mm |
| Transmission | Worm gear |
| Motors | Brushless coreless modules with integrated multi-in-one driver and miniature encoders |
| Thumb lateral movement | 0–87.5° |
| Thumb flexion/extension | 0–65° |
| Four-finger bending | 0–72° |
| Minimum open/close time | ≤ 0.7 s |
| Input voltage | 12 V (−10 %) to 48 V (+10 %) |
| Static current | ≤ 0.1 A |
| Maximum current | ≤ 2.5 A |
| Optional palm tactile sensor | Normal force 0–25 N, 0.1 N resolution |
| Optional finger tactile sensors | Normal force 0–20 N at 0.01 N resolution; tangential force direction 0–360° at 1° |
| Communication | EtherCAT, CAN FD or RS485, chosen with the order |
| Development platforms | Windows, Linux, ROS 2; x86 and ARM |
| Languages | C++, Python |
| Tools | Visual host application, open SDK, example programs |
| Model files | URDF, MJCF, STEP |
| Service life | 250,000 cycles unloaded and 250,000 cycles loaded (full-load side grip) |
| Design service life | 3 years |
| Operating temperature | −10 to 45 °C |
| Operating humidity | 10–90 % RH |
| Storage temperature | −10 to 70 °C |
| Protection rating | IP30 |
| Grip force | Confirm at quote |
| Hand payload | Confirm at quote |
| Wrist mounting adapter | Confirm at quote |
| Hand side | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Eleven, six of them active: six brushless coreless motors drive eleven joints across the thumb and four fingers through a worm-gear transmission.
Palm and fingertip tactile sensing are options. The palm sensor reads normal force up to 25 N at 0.1 N resolution; the finger sensors read normal force up to 20 N at 0.01 N and tangential direction across 360° at 1°.
It weighs 379 g ± 10 g and measures 147.54 × 73.53 × 26.35 mm. Grip force and payload for your task are confirmed with the quotation.
Over EtherCAT, CAN FD or RS485, chosen with the order, on a 12–48 V supply. The open SDK runs in C++ and Python on Windows, Linux and ROS 2 (x86 or ARM), with URDF, MJCF and STEP files; wrist fit to your humanoid is checked against RoboParty's dimension drawing before the order.
RoboParty rates it for 250,000 cycles unloaded and 250,000 cycles at full-load side grip, with a three-year design life, IP30 protection and an operating range of −10 to 45 °C.
Recently Viewed
You haven't viewed any products yet.
