- ±0.05 mm repeatability All three models hold ±0.05 mm, ten times tighter than the EBLM A Series figure.
- 1 kg to 3 kg, 380 mm to 600 mm The EBLM-1 carries 1 kg at 380 mm, the EBLM-2 carries 2 kg at 520 mm and the ARM-3 carries 3 kg at 600 mm.
- Arm mass from 2.6 kg to 12 kg The EBLM-1 weighs 2.6 kg, the EBLM-2 4.5 kg and the ARM-3 12 kg, so mounting and handling scale with the model.
- One joint envelope across the family Every model travels ±180° on J1, ±90° on J2, ±135° on J3, ±180° on J4, ±150° on J5 and ±180° on J6 at the same joint speeds.
- Operating temperature range Operation is rated from -10 to 50 °C at an IP50 ingress rating.
- Open software stack ROS, Python and C++ interfaces run over CAN or EtherCAT body communication.
- Power scales with the model Rated power is 50 W, 80 W and 280 W respectively, with maximum draw of 90 W, 110 W and 350 W from a 28–48 VDC supply.
Description
The Ti5 EBLM/ARM Series is a family of lightweight six-axis arms rated at ±0.05 mm repeatability — ten times tighter than the EBLM A Series, and the reason to choose this line. Three models are fully specified: the EBLM-1 at 1 kg and 380 mm, the EBLM-2 at 2 kg and 520 mm, and the model labelled both ARM-3 and EBLM-3 at 3 kg and 600 mm.
Mass is where the three separate most sharply. The EBLM-1 weighs 2.6 kg and sits on a small desktop fixture; the EBLM-2 is 4.5 kg; the ARM-3 jumps to 12 kg and draws 280 W rated against 50 W and 80 W, so power supply and mounting have to be sized for the model rather than for the series. All three take a 28–48 VDC input and a one-metre standard cable.
Everything else is common. Joint travel is ±180° on J1, ±90° on J2, ±135° on J3, ±180° on J4, ±150° on J5 and ±180° on J6, at identical joint speeds and a 1 m/s typical tool-side speed. The arms are aluminium alloy in a blue and white scheme, rated IP50, operating from -10 to 50 °C, and controlled over CAN or EtherCAT with ROS, Python and C++ interfaces.
The series fits developers and laboratories writing their own motion planning, perception or control software, vocational programmes teaching six-axis kinematics, and integrators who want a compact manipulator on a mobile or custom base. A fourth model, the ARM-5, completes the family, and its ratings are confirmed with the quotation.
Key Capabilities
- ±0.05 mm repeatability: All three models hold ±0.05 mm, ten times tighter than the EBLM A Series figure.
- 1 kg to 3 kg, 380 mm to 600 mm: The EBLM-1 carries 1 kg at 380 mm, the EBLM-2 carries 2 kg at 520 mm and the ARM-3 carries 3 kg at 600 mm.
- Arm mass from 2.6 kg to 12 kg: The EBLM-1 weighs 2.6 kg, the EBLM-2 4.5 kg and the ARM-3 12 kg, so mounting and handling scale with the model.
- One joint envelope across the family: Every model travels ±180° on J1, ±90° on J2, ±135° on J3, ±180° on J4, ±150° on J5 and ±180° on J6 at the same joint speeds.
- Operating temperature range: Operation is rated from -10 to 50 °C at an IP50 ingress rating.
- Open software stack: ROS, Python and C++ interfaces run over CAN or EtherCAT body communication.
- Power scales with the model: Rated power is 50 W, 80 W and 280 W respectively, with maximum draw of 90 W, 110 W and 350 W from a 28–48 VDC supply.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Series | EBLM/ARM Series |
| Variants | EBLM-1, EBLM-2, ARM-3 (also designated EBLM-3) |
| Further Variant | ARM-5 — parameters confirmed at quote |
| Product Type | Six-axis collaborative robot arm |
| Degrees of Freedom | 6 |
| Rated Load | EBLM-1 1 kg; EBLM-2 2 kg; ARM-3 3 kg |
| Working Radius | EBLM-1 380 mm; EBLM-2 520 mm; ARM-3 600 mm |
| Arm Weight | EBLM-1 2.6 kg; EBLM-2 4.5 kg; ARM-3 12 kg |
| Repeatability | ±0.05 mm |
| Joint Range of Motion | J1 ±180°, J2 ±90°, J3 ±135°, J4 ±180°, J5 ±150°, J6 ±180° |
| Joint Speed | J1–J3 180°/s, J4–J6 220°/s |
| Typical Tool-Side Speed | 1 m/s |
| Body Communication | CAN / EtherCAT |
| Programming Interfaces | ROS, Python, C++ |
| Power Supply | 28–48 VDC |
| Rated Power | EBLM-1 50 W; EBLM-2 80 W; ARM-3 280 W |
| Maximum Power | EBLM-1 90 W; EBLM-2 110 W; ARM-3 350 W |
| Operating Temperature | -10 to 50 °C |
| Ingress Protection | IP50 |
| Body Material | Aluminium alloy |
| Exterior Style | Blue and white |
| Standard Cable Length | 1 m |
| Price | Quotation only |
Industries
Frequently Asked Questions
Three are fully specified — the EBLM-1, the EBLM-2 and the model labelled both ARM-3 and EBLM-3. A fourth, the ARM-5, completes the family, and its specifications are confirmed with the quotation.
No. Both names refer to the same unit, designated both ARM-3 and EBLM-3. The current designation is confirmed on the quotation.
Precision and range. The EBLM/ARM arms are rated at ±0.05 mm repeatability against ±0.5 mm, span 1 kg to 3 kg and 380 mm to 600 mm, and are rated for a -10 to 50 °C operating range. The A Series is faster at the tool on its smaller variant and has wider J2 travel.
The models span 1 kg to 3 kg rated load and 380 mm to 600 mm working radius, with arm weights from 2.6 kg to 12 kg.
ROS, Python and C++ interfaces over CAN or EtherCAT body communication, which suits teams writing their own motion planning or control code.
It is offered by quotation — configuration, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
