- 33 pressure sensors in 9 arrays Three 2 × 2 arrays in the palm, a 2 × 2 array on each finger pad and a 3 × 1 array at each fingertip sense from 10 g to 2,500 g.
- Touch in the 1,000 Hz stream Sensor pressure and temperature arrive over USB 2.0 together with joint position, velocity, torque and IMU data at 1,000 Hz.
- Seven joints on three fingers The thumb has three degrees of freedom and the index and middle fingers two each, driven by six direct-drive micro brushless joints and one geared joint.
- Hybrid force and position control Each joint takes position, velocity, torque, stiffness and damping commands, so a grasp can be set soft or firm in software.
- 710 g at 175 × 88 × 77 mm Fingertips repeat to ±2 mm and the hand grasps up to 500 g on a 5 cm round object.
- 20 kg damage limit The sensor arrays take loads of 20 kg without damage, and the hand works from −20 to 60 °C.
Description
The Unitree Dex3-1 Tactile is the touch-sensing build of Unitree's three-finger dexterous robotic hand, in the version made for the Unitree H2 humanoid and supplied as one hand, left or right. It carries 33 pressure sensors in 9 arrays across the palm, finger pads and fingertips, sensing from 10 g to 2,500 g, on a 710 g hand with 7 degrees of freedom.
It is for H2 owners whose manipulation work depends on contact: slip detection, force-regulated grasps, closed-loop in-hand adjustment, and teleoperation or imitation-learning datasets that record touch with the joint data. Pressure and sensor temperature arrive in the same 1,000 Hz USB 2.0 stream as joint position, velocity, torque, temperature, voltage, current and IMU data, and the arrays take loads up to 20 kg without damage.
The thumb has three degrees of freedom and the index and middle fingers two each. Six joints are direct-drive micro brushless force-control units and one is geared, which gives hybrid force and position control at the joint; each takes position, velocity, torque, stiffness and damping commands. The hand measures 175 × 88 × 77 mm, repeats fingertip positions to ±2 mm, grasps up to 500 g on a 5 cm round object with up to 400 W for 3 s, and runs on 12–58 V from −20 to 60 °C.
The force-controlled Dex3-1 for the H2 is the same hand without the pressure arrays. G1 owners should see the Dex3-1 Tactile for the G1, and for five fingers with touch on the H2 there is the Dex5-1P Tactile. Compare every option in our dexterous robotic hands.
Key Capabilities
- 33 pressure sensors in 9 arrays: Three 2 × 2 arrays in the palm, a 2 × 2 array on each finger pad and a 3 × 1 array at each fingertip sense from 10 g to 2,500 g.
- Touch in the 1,000 Hz stream: Sensor pressure and temperature arrive over USB 2.0 together with joint position, velocity, torque and IMU data at 1,000 Hz.
- Seven joints on three fingers: The thumb has three degrees of freedom and the index and middle fingers two each, driven by six direct-drive micro brushless joints and one geared joint.
- Hybrid force and position control: Each joint takes position, velocity, torque, stiffness and damping commands, so a grasp can be set soft or firm in software.
- 710 g at 175 × 88 × 77 mm: Fingertips repeat to ±2 mm and the hand grasps up to 500 g on a 5 cm round object.
- 20 kg damage limit: The sensor arrays take loads of 20 kg without damage, and the hand works from −20 to 60 °C.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | Dex3-1 Tactile |
| Compatible robot | Unitree H2 (H2-dedicated version) |
| Hand side | Left or right, one hand per unit, chosen with the order |
| Fingers | 3 |
| Degrees of freedom | 7: thumb 3, index finger 2, middle finger 2 |
| Drive | 6 direct-drive micro brushless force-control joints, 1 gear-driven joint |
| Control | Hybrid force and position control |
| Thumb joint ranges | Joint 0: −60° to 60°; joint 1: −35° to 60°; joint 2: 0–100° |
| Index and middle finger joint ranges | Joint 0: 0–90°; joint 1: 0–100° |
| Weight | 710 g |
| Size (flat) | 175 × 88 × 77 mm |
| Fingertip repeat positioning accuracy | ±2 mm |
| Grasp load | Up to 500 g on a 5 cm round hard object, palm down or palm facing left |
| Peak power | 400 W for 3 s |
| Pressure sensors | 33 in 9 arrays |
| Array layout | Palm 2 × 2 (× 3); each finger pad 2 × 2 (× 3); each fingertip 3 × 1 (× 3) |
| Sensing range | 10 g – 2,500 g |
| Maximum load without damage | 20 kg |
| Feedback | Joint mode, position, velocity, torque and temperature; voltage and current; sensor pressure and temperature; IMU data |
| Working voltage | 12–58 V |
| Current | 0.2 A static at 58 V, 10 A maximum |
| Communication interface | USB 2.0 |
| Communication rate | 1,000 Hz |
| Packet size | 1,234 bytes sent, 1,270 bytes received |
| Control commands | Joint mode, position, velocity, torque, stiffness, damping |
| Working temperature | −20 to 60 °C |
Industries
Frequently Asked Questions
The Unitree Dex3-1 Tactile Three-Finger Hand for H2 is priced at $8,680 in your market.
33 pressure sensors in 9 arrays: three 2 × 2 arrays in the palm, a 2 × 2 array on each finger pad and a 3 × 1 array at each fingertip. They sense from 10 g to 2,500 g, take 20 kg without damage and report pressure and sensor temperature at 1,000 Hz.
The force-controlled Dex3-1 is the same three-finger hand without the pressure-sensor arrays and reads contact only through joint torque. Choose the Tactile when grasps depend on knowing where and how hard the hand touches.
Three fingers with 7 degrees of freedom keep the hand at 710 g and simpler to control than a five-finger hand, while the opposed thumb still pinches and wraps. Unitree rates the grasp at up to 500 g on a 5 cm round object, palm down or palm left.
Over USB 2.0 at 1,000 Hz, on 12–58 V with up to 10 A. Each joint takes mode, position, velocity, torque, stiffness and damping commands, and the hand returns joint, pressure, temperature, voltage, current and IMU data.
This version is made for the Unitree H2; the G1 has its own Dex3-1 Tactile. Each unit is one hand with the side chosen at order, so a two-handed H2 needs one of each.
Recently Viewed
You haven't viewed any products yet.
