The Wonik WR1000LF is the one-tonne pallet lift in Wonik Robotics' range of autonomous mobile robots. It picks a pallet clear of its resting position on a 100 mm stroke, holds it off the floor in transit and lowers it at the drop-off point, taking repetitive heavy runs away from manually driven equipment.

The low platform reflects the geometry of entering under a pallet: 956 x 1,350 x 318 mm with the lift module. Two 8-inch urethane driving wheels and four sub wheels carry it, and differential drive suits confined aisle layouts. General stops hold ±20 mm, the tighter of the two pallet-lift models, and docking with a QR code reference reaches ±10 mm.

Typical duties are moving palletized goods between receiving, storage, production and dispatch, and feeding palletized materials to work cells. For cycle times, plan on the average speed of about 0.7 m/sec rather than the 1 m/sec maximum. About 12 hours of operation and about 2 to 2.5 hours of charging from a DC50V / 50Ah Li-ion battery, with automatic sliding-type charging, allow scheduling across extended shifts.

The choice inside the family comes down to the load and the hand-over. The WR600LF lifts pallets up to 600 kg on 6-inch driving wheels, and the WR1000CV matches this robot's 1,000 kg rating but exchanges pallets by conveyor at fixed stations. Pick the WR1000LF when pallets of up to a tonne have to be lifted rather than conveyed. The accepted pallet format is confirmed with the quotation.

Key Capabilities

• One-tonne payload: The robot is rated for 1,000 kg, for heavy pallet runs in mapped industrial facilities.
• Pallet lift with a 100 mm stroke: The lift picks a pallet clear of its resting position, holds it off the floor in transit and lowers it at the drop-off point.
• 8-inch urethane driving wheels: Two 20 cm driving wheels and four sub wheels carry the platform, and differential drive suits confined aisle layouts.
• ±20 mm stop accuracy: General stops hold ±20 mm, and docking with a QR code reference tightens alignment to ±10 mm.
• Low 318 mm platform: With the lift module the robot measures 956 x 1,350 x 318 mm, the flat shape needed for under-pallet entry.
• Automatic sliding-type charging: The DC50V / 50Ah Li-ion battery supports about 12 hours of operation and recharges in about 2 to 2.5 hours.
• EN ISO 3691-4 certification: The certification list pairs this driverless-truck standard with EN ISO 12100:2010, EN 60204-1:2018, EN 55011 and EN 61000-6-2.

This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.

Buying through Robotix Market

This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.