- Fingertip tactile module Each of the five fingertips carries BrainCo's multi-dimensional tactile module, so the controller knows when and how the hand touches an object instead of guessing from motor current.
- Tactile adaptive control On top of position, velocity and current control, the hand sets finger current from what the fingertips feel, so a paper cup and a metal tool each get the grip they need.
- RGB camera included The H2 version comes with an RGB camera for a close view of the grasp; its model and mounting are confirmed with the quotation.
- EtherCAT, RS-485 and CAN FD EtherCAT joins RS-485 (Modbus-RTU) and CAN FD, on a 12–64 V supply through an XT30 connector.
- 383 g with a 50 N grip The hand weighs 383 g, grips with at least 50 N, pinches with at least 15 N and carries at least 20 kg.
- 11 degrees of freedom from six motors Six motors drive two thumb joints and one joint in each finger, five joints follow passively, and control repeats to 0.1°.
Description
The BrainCo Revo 2 Tactile is the touch-sensing version of BrainCo's Revo 2 bionic dexterous robotic hand, called the Revo 2 Touch in BrainCo's own range, supplied here for the Unitree H2 humanoid as one hand, left or right, with an RGB camera. Each fingertip carries a multi-dimensional tactile module, and the hand uses that signal in its tactile adaptive control mode to set the grip from what the fingers feel.
That makes it the Revo 2 to choose on an H2 when contact matters: fragile or deformable objects, grasps that must not slip, teleoperation where the operator needs to know the hand has closed on something, and imitation-learning datasets that record touch alongside joint angles and images. The camera adds a close view of the object at the moment of grasp; its model and mounting are confirmed with the quotation.
Mechanically it is the same 383 g hand as the Basic: 160 mm from palm base to middle fingertip, 100 mm maximum opening, 11 degrees of freedom from six motors, at least 50 N of grip, 15 N of pinch and a 20 kg payload, with 0.1° repeat control precision. Electrically it steps up to EtherCAT alongside RS-485 and CAN FD and a 12–64 V input through an XT30 connector, with the same Python and C/C++ SDKs for Linux, Windows and ROS and over-the-air firmware updates.
If your H2 work does not need touch, the Revo 2 Basic for the H2 uses the same mechanism without the sensors or the camera. For other robots, the Revo 2 Touch left hand (XTL) and its right-hand twin are sold on their own, and the 21-DoF Revo 3 U21T for the H2 is the step up in dexterity. Compare them with our full range of dexterous robotic hands.
Key Capabilities
- Fingertip tactile module: Each of the five fingertips carries BrainCo's multi-dimensional tactile module, so the controller knows when and how the hand touches an object instead of guessing from motor current.
- Tactile adaptive control: On top of position, velocity and current control, the hand sets finger current from what the fingertips feel, so a paper cup and a metal tool each get the grip they need.
- RGB camera included: The H2 version comes with an RGB camera for a close view of the grasp; its model and mounting are confirmed with the quotation.
- EtherCAT, RS-485 and CAN FD: EtherCAT joins RS-485 (Modbus-RTU) and CAN FD, on a 12–64 V supply through an XT30 connector.
- 383 g with a 50 N grip: The hand weighs 383 g, grips with at least 50 N, pinches with at least 15 N and carries at least 20 kg.
- 11 degrees of freedom from six motors: Six motors drive two thumb joints and one joint in each finger, five joints follow passively, and control repeats to 0.1°.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | BrainCo |
|---|---|
| Model | Revo 2 Tactile (BrainCo Revo 2 Touch) |
| Compatible robot | Unitree H2 (H2-dedicated version) |
| Hand side | Left or right, one hand per unit, chosen with the order |
| Fingers | 5 |
| Degrees of freedom | 11 (6 active, 5 passive) |
| Active joints | Thumb flexion, thumb abduction/adduction, and flexion of the index, middle, ring and little fingers |
| Weight | 383 g |
| Hand length (palm base to middle fingertip) | 160 mm |
| Maximum opening (thumb to index finger) | 100 mm |
| Five-finger grip force | ≥ 50 N |
| Pinch force | ≥ 15 N |
| Maximum payload | ≥ 20 kg |
| Repeat control precision | 0.1° |
| Flexion/extension time | ≤ 0.65 s |
| Operating noise | ≤ 50 dB at 50 cm |
| Tactile sensing | Multi-dimensional tactile module in each fingertip |
| Tactile sensor count and force range | Confirm at quote |
| Camera | RGB camera included; model and mounting confirmed with the quotation |
| Communication interfaces | RS-485 (Modbus-RTU), CAN FD, EtherCAT |
| Supply voltage | 12–64 V |
| Current at 24 V | 115 mA static, 390 mA average with no load, 4.65 A maximum |
| Power connector | XT30 |
| Control modes | Position, velocity and current control; cascaded and compliance control; tactile adaptive control |
| Protection | Current, stall, over-temperature and collision protection |
| SDK | Python and C/C++ for Linux, Windows and ROS |
| Firmware updates | Over the air (OTA) |
| Operating environment | −10 to 40 °C, up to 90 % relative humidity |
| Mounting and cabling on your H2 | Confirm at quote |
Industries
Frequently Asked Questions
The BrainCo Revo 2 Tactile Bionic Hand for Unitree H2 is priced at $8,680 in your market.
Each of the five fingertips carries BrainCo's multi-dimensional tactile module, and its readings drive the hand's tactile adaptive control. The sensor count and force range of the H2 version are confirmed with the quotation.
The Basic has no tactile module, connects over RS-485 or CAN FD only and runs on 12–28 V. The Tactile adds the fingertip sensors, EtherCAT, a 12–64 V input and an RGB camera; weight, grip force and joint layout are the same.
Eleven, six of them motor-driven. The thumb has two driven joints (flexion and abduction/adduction) and one passive joint, and each other finger one driven and one passive flexion joint.
Over EtherCAT, RS-485 (Modbus-RTU) or CAN FD, on a 12–64 V supply through an XT30 connector. BrainCo's Python and C/C++ SDKs support Linux, Windows and ROS; mounting, cabling and the camera position on your H2 are confirmed with the quotation.
Each unit is one hand, left or right, chosen with your order, so a two-handed H2 needs one of each. For other robots, the Revo 2 Touch is sold on its own as separate left (XTL) and right (XTR) hands.
BrainCo Revo 2 Tactile Bionic Hand for Unitree H2
- Regular price
- $8,680.00
- Sale price
Recently Viewed
You haven't viewed any products yet.
